Frequently Asked Questions
Points with Height of 0.0
Some of our points came into the system with 0.000 heights.
These came from another package. We made these points non-contourable.
When the long and cross sections were created it used these points with the 0.000 levels even
though they were non-contourable.
The best way is to remove the heights from those points.
Do this by these steps.
Select points by height range -0.0001 to +0.0001
Display Properties, then erase the height field, then save. (all selected point heights are erased.)
The points have no height and will not be used in triangulation.