Display Settings 3

This dialog box allows the user to control the plan display diagram.
The following options are available

Lines Width
Enter required line width for all parcel lines
0.3mm is 1 pixel wide, 0.6mm is two pixels wide etc.

Historical Lines Width
This is similar to the above but applies only to those parcels which have the “historical” flag set. Historical parcels are those which have been superseded by later subdivision. They are often kept in the network to provide connectivity and redundancy for the adjustment process. A different line width allows them to be visibly separated from the “current” parcels.
Enter the thickness of the Historical plan lines, 0.3mm is 1 pixel wide, 0.6mm is two pixels wide etc.

Point Symbol, Point Number - Max Scale
When you zoom out to a large scale, the display becomes a mess of overwriting symbols
Above the required scale, the point symbols and point numbers will not be displayed
If left blank or set to 0.0, the point symbols and text will always be displayed



Lot, Plan Name - Max Scale
When you zoom out to a large scale, the display becomes a mess of overwriting text
Above the required scale, the point symbols and point numbers will not be displayed
If left blank or set to 0.0, the lot, plan text will always be displayed

Control Point - Max Scale
When you zoom out to a large scale, the display becomes a mess of overwriting text
Above the required scale, the point symbols and point numbers will not be displayed
If left blank or set to 0.0, the control text will always be displayed