Import ACT Data

This will read a .TXT file containing Parcel information from the ACT Parcel Database.
It will then display this data as a joined parcel network
Lots are displayed in the “ACT” text files as follows:
BLOCK 1 SECTION 3 FARRER  OCD=BLOCK:STANDARD:WODE:FARR:3:1/1  Modified 12APR94-18.44.20
Obj Accuracy: Survey Accurate
Update dtg  : 01AUG90-00.00.00-SYS
Key ident   : 33340030001

BEARING       DISTANCE    ARC      RADIUS     RADIAL          EASTING        NORTHING

                                            177 17 50.1      207840.9404   593790.7150
 84 52 15.0      79.359   79.382  -937.249  172 26 40.0      207919.9813   593797.8098
167 23 23.6      42.059                                      207929.1635   593756.7650
258 28  0.0      21.336                                      207908.2586   593752.4992
167 30  0.0      42.671                                      207917.4943   593710.8396
245 10  0.0      44.706                     155 10  0.0  TP  207876.9224   593692.0642
287 54 41.3       6.206    6.822    4.572   240 39 22.6  TP  207871.0169   593693.9729
                                  324.608   240 39 22.6  TP  207871.0169   593693.9729
335 29 41.3      54.760   54.825  324.608   250 20  0.0 BEND 207848.3038   593743.8003
344 18 30.0      42.703                     254 18 30.0  TP  207836.7544   593784.9117
 35 48 10.0       7.156    8.218    4.572   357 17 50.1 BEND 207840.9404   593790.7150

    AREA =       6499.89  SQUARE METRES
-------------------------------------------------------------------------------------- The “BLOCK” number is stored as the lot number and the “SECTION” number as the Plan Number. If road centreline data is included in the file it will display the road name and ask for a road width. If the width is entered it will add connections at each tangent point to the adjacent boundary. The road centrelines will be entered as lines type 997, and the road lot will also be classified as a 997 lot since the road may not close on to itself.